Learn more about COVID-19 in Saskatchewan:

Google Translate Disclaimer

A number of pages on the Government of Saskatchewan's website have been professionally translated in French. These translations are identified by a yellow box in the right or left rail that resembles the link below. The home page for French-language content on this site can be found at:

Renseignements en Français

Where an official translation is not available, Google™ Translate can be used. Google™ Translate is a free online language translation service that can translate text and web pages into different languages. Translations are made available to increase access to Government of Saskatchewan content for populations whose first language is not English.

Software-based translations do not approach the fluency of a native speaker or possess the skill of a professional translator. The translation should not be considered exact, and may include incorrect or offensive language. The Government of Saskatchewan does not warrant the accuracy, reliability or timeliness of any information translated by this system. Some files or items cannot be translated, including graphs, photos and other file formats such as portable document formats (PDFs).

Any person or entities that rely on information obtained from the system does so at his or her own risk. Government of Saskatchewan is not responsible for any damage or issues that may possibly result from using translated website content. If you have any questions about Google™ Translate, please visit: Google™ Translate FAQs.

Reducing storage losses baled hay

By Terry Kowalchuk, MSc. PAg., Provincial Specialists, Forage Crops, Regina

August 2020

Soaking rain or repeated snow melt can result in significant losses in baled hay. Based on surface area, a six-foot wide, six-foot diameter bale can receive up to 22 gallons of water for each inch of precipitation. Just four inches of surface spoilage can result in a 25 per cent loss of feed (Figure 1).

Hay spoilage chart
Figure 1: Effect of depth of spoilage on percentage of hay waste.

Here are some tips to minimize storage losses:

High density net wrapped bale
High density net wrapped bale
  • Bale size – Large round bales typically have a higher storage loss than rectangular bales. For round bales, the amounts of bale volume exposed to the elements per unit of surface area increases as bale size decreases. Everything else being equal, smaller round bales have greater losses than large diameter ones.
  • Make a dense bale – A dense bale will sag less and have less surface area in contact with the ground. A dense surface layer will shed more precipitation and protect the inner part of the bale from weathering. Bale density should be at least 10 pounds per cubic foot to facilitate resistance to weathering. As bale density increases, the rate at which moisture and heat escape decreases. Therefore, it is critical that dense bales be baled at the proper moisture (18 to 20 per cent or less) so that the risk of spoilage and heating problems are reduced.
  • Use net wrap – Net wrapped bales shed moisture better than twine bales (this benefit is lost if bales are not stored on a well-drained surface). Net wrap also reduces leaf loss during baling and speeds up the baling process which saves fuel and labour.
  • Store bales on a well-drained location – Bales soak up moisture if placed on a wet or poorly-drained site, causing a large layer of spoiled hay on the bottom of the bale. The storage site should drain away in all directions. A well-drained, four to six-inch coarse rock base will minimize bottom spoilage. Rock base may need to be deeper depending on the weight of equipment used to store and retrieve bales as well as the soil type.
  • Locate bale rows away from tree rows – To avoid accumulation of snow, contact with snow drifts and to allow wind to dry the hay after rain or snow, do not store bales under trees or other areas where drying is impaired.
  • Store bales end to end – The arrangement of large round bales in outdoor storage can significantly influence the amount of storage loss. Under most conditions, position bales end to end in long lines. If more than one line of bales is needed, space adjacent lines at least 10 feet apart. This will minimize snow buildup between rows and allow the sun to reach the back row. Stacking large round bales usually increases losses. Stacking tends to trap moisture and limit drying action from exposure to the sun and wind.
  • Store bales in rows which run up and down the slope with a north/south orientation – A southern exposure is best to promote rapid drying following precipitation.

If producers have further questions, they can contact their local Ministry of Agriculture regional office for further information.

We need your feedback to improve saskatchewan.ca. Help us improve