Warning lights must also be used to warn other drivers. These lights need to be 175 mm round or 120 mm x 152 mm. The lights must be mounted on each side of the building (red at the rear, amber at the front).
If moving a building between midnight and sunrise, you will require escort vehicles. They must be properly equipped if the building exceeds 4.45 m (15 ft) wide at the base. On a two-lane highway a minimum of two lead escorts and one trail escort is required. On a four-lane highway a minimum of one lead escort and two trail escorts are required. Additional escorts may be used as required. A third escort is required when the passing lane is reduced to 3.1 m (10 ft) or less.
If inclement weather exists, the move should be postponed. If visibility is reduced to less than 1500 m or when the roadway is covered with snow, sleet or ice, which impedes the driver’s or other motorists ability to drive in a safely, the move should be suspended.
When moving a building you must travel at least 20km/h. On a two-lane highway, the building mover must travel as far over on the right side of the road as possible. This can include the shoulder. On a four-lane highway the building must travel in the right lane only (unless passing obstacles) and as far right as possible. This includes the shoulder.
Notice period in effect during business hours (8:00 a.m. - 5:00 p.m., Monday - Friday excluding statutory holidays). The notice period starts over if changes are made to the route or building dimensions.
The 24 or 48 hour notice begins when the application is sent back to the mover, not when the application is received in the Permit Office.
The building mover is required to conduct a route assessment.
If the building is over 5.18 m high, an approval number from SaskPower is also required. Other approvals may be required depending on type of obstruction (SaskTel, CN, CP, etc.)
If moving a building wider than 7.32 m (24 ft), a minimum notice is required.
- If the building is being moved only on provincial highways, 24 hours is required
- If the move is on municipal and provincial roads, 48 hours is required
- If the route or building dimensions change, the notice period resets
For loads exceeding 7.32 m (24 ft.) wide, travel on those highways restricted in will only be allowed for short distances where there is no reasonable alternate public road available, or where the origin or delivery point is on the designated highway.
Travel on the following two lane highways will only be allowed subject to Ministry of Highways and Infrastructure Policy Advisor approval where there is no reasonable alternate public road available:
- Highway #5, from Saskatoon to Humboldt
- Highway #6, from Southey to Junction Highway #39
- Highway #7
- Highway #10, from Junction Highway #1 to Junction Highway #15
- Highway #39, from Junction Highway #6 to U.S. Border
- Highway #16, portions east of Saskatoon
An accurate weight estimate is required.
- A weight estimation can be determined from the crib jack gauges by utilizing the following formula:
- Individual crib jack load weight = sq. inches on top of crib jack x psi
- Total load weight can be determined by totaling all of the individual crib jack weights as determined above.
- Weight is in pounds.
- Equipment (tarp weight, etc.) is in addition to this estimate.
- If a weight is not available using the method described above, the following formula can be utilized to determine an alternative weight estimation for the building structure:
- Building Weight (in pounds) = 44 x length (ft) x width (ft)
- Building Weight (in kilograms) = 20 x length (ft) x width (ft)
How to Apply
In order to apply, you must complete the building move permit application form. The information must include:
- Name of company
- Contact information
- Type of building
- Registered weight
Download Permit Application Form
Submit completed applications to an SGI Permit Office
Additional information can be obtained by contacting the inquiry line: 1-866-933-5290 in Saskatchewan or 306-933-5290 outside the province.